Documentation Archief - Page 4 of 5

Access – Push-button terminal block for 230V doorbell – AC-RP/Be

DA-016-05_AC-RP_Be Push-button terminal block for 230V doorbell with integrated output 150W/105VA. The doorbell can be connected anywhere in the house. Multiple doorbells are also possible. The push-button input also sends the ‘calling’ signal to the ONE Smart control data network, so that additional functions can be performed (e.g. flashing of specific lights). Measurements: 31 x…

Darkening – Push-button terminal block for shading with 1 or 2 push-button inputs – SH-P/Wi SH-PP/Wi

DA-014-05_SH-P_Wi_SH-PP_Wi Push-button terminal block for shading with 1 or 2 push-button inputs Recall and adapt the different atmospheres for room darkening. Multiple terminal blocks can perform the same function. Measurements: 31 x 24 x 17 mm (L x W x H)

Darkening – Venetian blind control for venetian blind motors up to 700VA – SH-VP

DA-013-05_SH-VP Motor control with terminal block for a local push-button. Relay with mechanical locking mechanism. For installation in flush-mounting box or shutter box. Different positions can easily be stored and recalled. Measurements: 44 x 49 x 18 mm (L x W x H)

Darkening – Awning control for awning motors up to 700VA – SH-MP

DA-012-05_SH-RP_SH-MP The gray terminal blocks L are designed for the connection of roller shutter or awning drives with mechanical limit switches. Connected loads can be controlled over the 230V wiring via ONE commands.

Lighting – Foot switch with integrated dimmer – LI-DP/FI

DA-010-05_LI-DP_Fl Foot switch with integreted dimmer for lighting points up to 150W/105VA. Intelligent dimmer with reverse phase control, without minimum load. Switches silently. Can also be used as a stand-alone-dimmer. Measurements: 52.5 x 30 (diameter x H)